This is a rare pair of Salk HT3 Speakers. If you have not heard of Salk its because most of his products (Jim Salk) are custom builds based off one of his several designs. Its also hard to see two that look alike since he uses custom finishes based on customer request.
These are Jazz / Classical / Piano / Violin / Acoustic speakers the less the composition the more you find when listening. Most people consider Salks to be too bright for Rock / Metal / Hip Hop
Being custom made a pair of HT3s were typically $4000 or more new.
You can read some complete reviews here
http://www.audioreview.com/product/speakers/floorstanding-speakers/salk-sound/veracity-ht3.html
DESCRIPTION
Design Full-range, floor-standing WMT 3-way
Drivers (1) G2 pure ribbon tweeter, (1) Seas Excel W18 EX midrange and (1) Custom aluminum-coned, low-distortion 10" subwoofer with 21mm XMAX
Response 34Hz - 25KHz (+/- 1.5 db) 29Hz - 40KHz (+/-3db) (F10 23Hz)
Sensitivity (dB/2.83v/1M) 85db
Impedance nominal 8 ohms
Recommended Amplification 50 - 200 tube watts 120 -500 solid state watts
Box Alignment sealed midrange/ported woofer
Dimensions (HWD) 40"x12"x15" (not including plinths and spikes)
Weight is approx 65lbs each
Many listeners have noted that the ‘right’ amp is important to get the sound you are looking for. Luckily HFT always has a wide range of audiophile amps to demo with any of our speakers.
This is a rare pair of Salk HT3 Speakers. If you have not heard of Salk its because most of his products (Jim Salk) are custom builds based off one of his several designs. Its also hard to see two that look alike since he uses custom finishes based on customer request.
These are Jazz / Classical / Piano / Violin / Acoustic speakers the less the composition the more you find when listening. Most people consider Salks to be too bright for Rock / Metal / Hip Hop
Being custom made a pair of HT3s were typically $4000 or more new.
You can read some complete reviews here
http://www.audioreview.com/product/speakers/floorstanding-speakers/salk-sound/veracity-ht3.html
DESCRIPTION
Design Full-range, floor-standing WMT 3-way
Drivers (1) G2 pure ribbon tweeter, (1) Seas Excel W18 EX midrange and (1) Custom aluminum-coned, low-distortion 10" subwoofer with 21mm XMAX
Response 34Hz - 25KHz (+/- 1.5 db) 29Hz - 40KHz (+/-3db) (F10 23Hz)
Sensitivity (dB/2.83v/1M) 85db
Impedance nominal 8 ohms
Recommended Amplification 50 - 200 tube watts 120 -500 solid state watts
Box Alignment sealed midrange/ported woofer
Dimensions (HWD) 40"x12"x15" (not including plinths and spikes)
Weight is approx 65lbs each
Many listeners have noted that the ‘right’ amp is important to get the sound you are looking for. Luckily HFT always has a wide range of audiophile amps to demo with any of our speakers.
